AG在线手机版下载_AG真人视频官网_注册手机版账号

AG在线手机版下载_AG真人视频官网_注册手机版账号

泄泄电流测试仪

台湾华仪 7630 全功效打仗电流测试仪 EEC 7630泄泄电流测试仪

  • 产物概述:
    ♦量测打仗电流时,亦可显现人体仿真阻抗线路(MD)两头的电压 ,知足打仗电流IEC 60990 规范请求
    ♦打仗电流可量测 AC/DC/AC+DC ,知足医疗装备IEC 60601 规范请求
    ♦量测带宽 DC - 1MHz,合适 IEC60990 打仗电流测试规范
    ♦可矫捷挑选MD泄电流量测点(如: IEC60065 U1&U2),合适安规规范请求
    ♦内建 7 组人体摹拟阻抗(MD)与1组扩大空间,知足多种安规规范请求
    ♦可搭配华仪安规测试器构成安规天地一(ACW/DCW/IR/GB/RUN/LLT) 测试体系,延长测试时候
    ♦MD 具备BNC量测端子,可外接示波器或电压表读取电压值,便利对MD停止校准
    ♦开机灵能检测功效,主动确认仪器输入一般,确保测试的靠得住度
    ♦校订及预警时候设定功效,提示用户按期校订,确保测试品质
    ♦测试成果可贮存进程中最大泄电流 (Imax),知足客户对品质的请求
    ♦可选配最大峰值 75mApeak / 有用值 35mArms 量测,知足安规机构测尝试证需要
  • 型号规格: 7630

7630泄泄电流测试仪 产物先容

具备多项专利及立异功效,兼具大功率负载量测才能,合适一切打仗电流的测试利用;超大型 320 x 240 Graphic LCD ,可同时显现量测电压/打仗电流及测试时候;完全的主动化接口,如收集卡、USB & RS-232、IEEE-488 (GPIB) 及其余接口,可履行主动化测试,亦可搭配华仪安规测试器,构成测试体系,晋升测试效力。

 

7630泄泄电流测试仪产物特色

  • 量测打仗电流时,亦可显现人体仿真阻抗线路(MD)两头的电压 ,知足打仗电流IEC 60990 规范请求

  • 打仗电流可量测 AC/DC/AC+DC ,知足医疗装备IEC 60601 规范请求

  • 量测带宽 DC - 1MHz,合适 IEC60990 打仗电流测试规范

  • 可矫捷挑选MD泄电流量测点(如: IEC60065 U1&U2),合适安规规范请求

  • 内建 7 组人体摹拟阻抗(MD)与1组扩大空间,知足多种安规规范请求

  • 可搭配华仪安规测试器构成安规天地一(ACW/DCW/IR/GB/RUN/LLT) 测试体系,延长测试时候

  • MD 具备BNC量测端子,可外接示波器或电压表读取电压值,便利对MD停止校准

  • 开机灵能检测功效,主动确认仪器输入一般,确保测试的靠得住度

  • 校订及预警时候设定功效,提示用户按期校订,确保测试品质

  • 测试成果可贮存进程中最大泄电流 (Imax),知足客户对品质的请求

  • 可选配最大峰值 75mApeak / 有用值 35mArms 量测,知足安规机构测尝试证需要

全方位摹拟人体电路

供给7组人体摹拟线路(MD)及8组生效形式阐发(Fault Condition),摹拟实在天下的各类能够触电风险状态。

图片关头词
40A

大电流负载才能

负载容量可高达40A有用值,使其合用于大电流产业产物。

测试成果一目明了

可同时显现电流丈量值或MD两头电压值,清晰显现测试成果。

7630 Details
Swappable MD

多功效替代装配

MD可抽换式设想,让利用者易于替代差别挑选外,更知足疾速的的校验、维修与替代。

增援界面.jpg

Specification :

INPUT

Voltage

115/230 VAC ± 15%

Frequency

50/60 Hz ± 5%

Fuse

2A Slow-Blo 250V AC

Line condition

Power Switch

Reverse polarity switch for normal condition (on / off / auto setting)

Neutral Switch

Neutral switch on/off selection for single fault condition

Ground Switch

Ground switch on/off selection for class I single fault condition

Probe Setting

Surface to Surface (PH- PL)

Surface to Line(PH - L)

Ground to Line (G - L)

Ground to Neutral (G - N)

Auto Function (G - N & G - L)

SETTING

Touch Current High Limit (RMS)

Range:

0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA

Resolution:

0.1uA/1uA/0.01mA

Touch Current Low Limit (RMS)

Range:

0.0-999.9 uA

Resolution:

0.1uA

Touch Current High Limit (Peak)

Range:

0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA

Resolution:

0.1uA/1uA/0.1mA

Touch Current Low Limit (Peak)

Range:

0.0-999.9 uA

Resolution:

0.1uA

DISPLAY

Touch Current Display (RMS)

Range 1

0.0uA~ 999.9uA, frequency DC - 1MHz

Resolution

0.1uA

Accuracy

DC : ±2% of reading + 3counts
15Hz < f<100KHz : ±2% of reading + 3counts
100KHz < f < 1MHZ : ±5% of reading (10.0uA - 999.9uA)

Range 2

1000uA~8500uA, frequency DC - 1MHz

Resolution

1uA

Accuracy

DC : ±2% of reading + 3counts
15Hz < f<100KHZ : ±2% of reading + 3counts
100KHz < f<1MHZ : ±5% of reading (10uA - 8500uA)

Range 3

8.00mA~20.00mA, frequency DC - 1MHz

Resolution

0.01mA

Accuracy

DC : ±2% of reading + 3counts
15Hz < f < 1MHz : ±5% of reading (0.01mA -20.00mA )

Touch Current Display (Peak)

Range 1

0.0uA~ 999.9uA, frequency DC - 1MHz

Resolution

0.1uA

Accuracy

DC : ±2% of reading +2uA
15Hz < f<1MHZ : ±10% of reading +2uA

Range 2

1000uA ~ 8500uA, frequency DC - 1MHz

Resolution

1uA

Accuracy

DC : ±2% of reading +2counts
15Hz < f<1MHz : ±10% of reading +2counts

Range 3

8.0mA ~ 30.0mA, frequency DC - 100KHz

Resolution

0.01mA

Accuracy

DC : ±2% of reading +2counts
15Hz < f < 100KHz : ±10% of reading +2counts

Measuring Device Module

MD1

IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010

IEC60990 Fig4 U1, IEC60065

MD2

IEC60990 Fig5 U3, IEC60598-1

IEC60990 Fig5 U1

MD3

IEC 60601-1

MD4

UL544NP, UL484 , UL923, UL471, UL867, UL697

MD5

UL544P

MD6

UL1563

MD7

IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Test MD Circuit.

External MD

Basic measuring element 1k ohm

MD Voltage Limit

70Vdc

Leakage Current Offset

Range:

0 - 999.9uA

Resolution:

0.1uA

DUT POWER

AC Voltage

0.0-277.0V

AC Current

40Arms max continuous

Over Current Protection

50Arms, Response Time < 3 sec / 250Apeak Response Time<10u sec

AC Voltage High/Low Limit

Range:

0.0-277.0V

Resolution:

0.1V/step

AC Voltage Display

Range:

0.0 - 277.0 V

Resolution:

0.1 volt / step

Accuracy:

±(1.5% of reading + 2 counts) , 30.0 - 277.0VAC

Delay time setting

Range:

0.2 !V 999.9 seconds

Resolution:

0.1 second

Timer display

Range:

0.0 !V 999.9 seconds

Resolution:

0.1 second

Accuracy:

± (0.1% of reading + 0.05 seconds)

GENERAL

PLC Remote Control

Input - Test, Reset, Interlock & Recall File 1 through10

Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out

Scanner Control

It is applied to control Matrix Scanner (Model 7006)

Memory

50 memories , 30steps per each memory . Max. Result Display 900 data (30 memories x 30 steps)

Auto Reverse Function

AUTO Reverse ON / OFF parameter setting selection
Automatic Reverse polarity switch for normal condition in one step setting menu.
Only display maximum leakage current value.

Scope Output Interface

At rear panel BNC type to connet scope for some IEC standards test requirement and application.

Display

320 X 240 graphic LCD

LCD Contrast Setting

Range: 1-9; 1 is lightest character, 9 is darkest character.

Alarm Volume Setting

Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume.

Security

Lockout capability to avoid unauthorized access to test set-up programs.

Calibration

Software and adjustments are made through front panel,
Automatic Calibration alert function to signal operator when calibration is due.

Results Display

All test result information will be displayed on the screen.

Interface

RS232 standard

Safety

Product with TUV/GS certificate

Dimension

430 (W) x 133(H) x 300 (D) mm

Weight

12 Kg

STANDARD ACCESSORIES

Power Cord

X1

Fuses

X2 (Including a spare contained in the fuse holder)

Interlock Disable Key(1505)

X1

TC Receptacle Adaptor Box (1932)

X1

Hipot Test Lead for PH / PL (1101)

X2

RS232 Link Cable 1.5m(1130)

X1

DUT Power Cable 40A(1148)

X1

RUN Module (Opt.752)

W

Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W

A

Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A

PF

0.000 -1.000

Leakage Current

Range : 0.00 - 10.00mA , Resolution : 0.01mA

AC Current High/Low Limit Setting

Range:

0-40A

Resolution:

0.01A/step

AC Current Display

Range:

0.000 !V 3.500 A / 3.00 - 40.00A

Resolution:

0.001A / 0.01A

Accuracy :

± (2 % of reading + 5 counts) / ± (2 % of reading + 2 counts)

AC Power High/Low Limit Setting

Range:

0 - 10KW

Resolution:

1W

AC Power Display

Range:

0.0 -1000.0W / 1000 - 10000W

Resolution:

0.5W / 5W

Accuracy :

±(2 % of reading + 2 counts )

Power Factor High/Low Limit Setting

Range:

0.000 - 1.000

Resolution:

0.001

Power Factor Display

Range:

0.000 - 1.000

Resolution:

0.001

Accuracy :

± (2 % of reading + 2 counts )

Leakage Current High/Low Limit Setting

Range:

0.00 - 10.00mA

Resolution:

0.01mA

Leakage Current Display

Range:

0.00 - 10.00mA

Resolution:

0.01mA

Accuracy :

± (2 % of reading + 2 counts )

Delay Timer Setting

Range:

0, 0.2 - 999.9

Resolution:

0.1

Dwell Timer Setting

Range:

0, 0.1-999.9 (0=continuous)

Resolution:

0.1

Timer display

Range:

0.0 - 999.9 seconds

Resolution:

0.1 second

Accuracy:

± (0.1% of reading + 0.05 seconds)

Power Control

It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Series)

HV & GB Link Module (Opt. 753)

Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A

GPIB Interface Card (Opt. 731)

Printer Port Interface Card (Opt. 732)

Multi-function Interface Card (Opt. 751)

Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability.

High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 )

35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Test Requiremt ,
Notice : Option this MD circuit have to replace MD module all MD circuits .

Transformer Box (Option) Add this option must optional Opt.752 RUN Module.

1931 Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA)

Multi-Tape of 1.0, 1.06, 1.1 times of input voltage.

1931-S Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA)

Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage.

AC Power Source (Option) Add this option must optional Opt.752 RUN Module.

6800 Series Digital AC Power Source (6805, 6810 , 6820 , 6830 and 6840 )

6700 Series Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 )

6400 Series AC Power Source (6402, 6403, 6405, 6410 )


var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?e926529819a30f1e527282f563736c78"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();